Do you want to have a note of some quick guidelines on how to install ceramic floor tiles? Then this article might be helpful. This article guides you step by step on the method of installing ceramic floor tiles.
Before looking at the actual procedure of installation, let us have a list of following things which are to be done and kept in mind.
One should set up the room in which ceramic floor tiles need to be installed. First step is to note down the dimensions of room, then deciding the size of the tiles which is most appropriate for the length and breadth of the room. In case if the default sizes of the ceramic floor tiles are not suitable for the room dimensions then tile cutters are used to cut the tiles into appropriate sizes. Further, it is essential to know whether the basement of room is flat, incase if it is not wooden basement installation might be required for leveling up the floor. Next step is to trim the doors in order to prevent their stopping during open and close.
Materials which are essential for ceramic floor tile installation are adhesives, grouts and caulking wall joints. Different adhesive materials are mixed in various proportions to design a perfect concoction of joining material. This adhesive connects the tiles with the floor, while joints within tiles and between tiles and walls are called grouts and caulking wall joints respectively.
In addition to these, certain tools and equipments needed for installation should also be kept beforehand. Some of the usually used tools are grout float, rubber mallet, a square and a level.
After setting up all the above things, here comes the actual procedure of installing ceramic floor tiles. First important thing that has to be determined is the centre point of the room, this helps in deciding where the first tile should be placed. Then based on the centre point of the floor, divisions of floor into quadrants are made.
Thereafter, prepare an appropriate adhesive concoction and spread it along the floor and place the tiles starting from the centre point to the whole quadrant. Similar procedure should be followed for all the quadrants in room. Next step is to level up the whole floor by tapping tiles with a rubber mallet beginning from the corner of each quadrant. This step is very important to ensure that slope of the floor is in a desired direction.
Grout is a material used to remove any unwanted spaces between the tiles. Grouting is also performed quadrant by quadrant in a similar way to that of spreading the adhesive mixture.
Final step is installing wall joints. Wall joints make the ceramic tile flooring more flexible. This is very important to avoid any unnecessary cracks and breaks in a tile network.
By following all the above guidelines it might be possible for easy and efficient installation of ceramic floor tiles in your residential and commercial units.
Read more about Ceramic Floor Tiles – Floor Tiles With Appropriate Advantages